Quick Pothole Fix
A quick instructional guide on how to make a temporary repair to tarmac surfaces whether they be in roads or footpaths.
You are going to need the following:
Tools: Firstly you will need a hand punner to compact the lose material, a shovel and broom.
Materials: you will need cold-lay tarmac which is available from normal DIY stores and comes in 25kg bags or in tubs and bitumen tac-coat which will make a sticky bond below the tarmac so it will stick to the pothole. This is available in normal aerosol cans so real easy to use.
- Step 1: Clean the area so you can do the repair nice and easy without anything getting in your way.
- Step 2: Tac-coat the area. Tac-coat is a sticky bitumen solution available in aerosol cans form DIY stores. It creates a sticky bond between the temporary tarmac and the existing surface to prevent it from pulling out. You need to get a nice even coverage over the area that you want to apply the temporary tarmac too.
- Step 3: Place the temporary tarmac material in the area to be repaired, generally this will come in a plastic bag or tub. As the tarmac hits the surface it will start to move around as it settles, it’s very much a lose material that will allow you to work it around. The only problem you will get with this material is when it’s very cold. So don’t keep it outside in the garage or out where it’s frosty, it’s best just to get what you need from the store and use it more or less straight away.
- Using the shovel even out the material to fill the area leaving it slightly proud to allow for compaction. But you don’t want to have too much material and any excess should be removed. Once levelled out make sure you have a nice even surface so it compacts flat. Pull in any lose material from the sides and it will be ready for compaction.
- Step 4: Fourth and final step compaction, with your lose material in the ground you need to really compact it to ensure it firms up, makes a strong surface and stays in the position where you want it. Otherwise it’s just going to pull out immediately as soon as someone drives over it and you will have a pothole again.
Starting from the edges, compact all the way round. Using the punner, give it a strong firm compaction and keep going all the way around. The idea of compact is that you’re locking the stones together, as you lock them together they become firmer in the hole and create a proper surface. Keep compacting as you feel it firming up as hard as you can to get a really strong surface. This can be exhausting but keep going to make sure you get the entire area compacted properly.
Finally clean up the edges with a broom and you done.
That took me all of about 10 minutes to complete, all you need to do is make sure you prep the area beforehand, you have the right material and tools and you will be able to make a temporary repair to any tarmac surface. This will even work on potholes in concrete if you need to make a quick temporary repair.
Just remember this is not a permanent solution but it will give you plenty of time to engage a contractor to complete a longer lasting repair.
Planned maintenance is the only way forward, both to protect budgets in the long term and ensure that our roads are kept to high standards that we rightly should expect.
Renoo.co.uk are a national one-stop, pothole repair shop and specialise in providing long-lasting, cost-effective solutions to pothole damage.